La description
High Speed Centrifugal Spray Drier
(LPG***0/ZLPG***0)Â
Working Procedures
The raw material Liquid is transferred into the high speed
centrifugal atomizer on the top of the drying tower through the
feeding pump, and then it is sprayed through the holes of spray
nozzle, under the centrifugal effect, forming fine mist group. The
air is blast into steam heating exchanger and electrical heater
through filter, reaching **0~**0 degree centigrade, and then it
will be filtered through the high efficient air filter and spread
by the hot air distributor equably.
At this moment, the hot air and raw material would be fully
blended, the water in raw material would be quickly evaporated, and
the dry powder will fall into the bottom of the drying tower cone.
The fine powder and end gas will be separated by cyclone separator
though the discharging pipe. The product will be separated through
the bottom of two class cyclone separator. The fine granules and
end gas will be purified by entering the spray dust collector. The
end gas will reach emission standard and then be discharged
outside.
Technical Parameters
1. Material Name:
2. Solid content in the liquid material:
3. Water content of finished product: Less or equal to 3%
4. Water Evaporating Capacity: **1kg/h
5. Heating Method: Steam heating exchanger for heat exchange &
Electricity heater
6. Output capacity of finished product: **0kg/hr
7. Air inlet temperature: Depends on the nature of material
8. Air outlet temperature: Depends on the raw material
9. Dust collection: IIClass Cyclone segregator & spray dust
catcher
*0. Finished product rate: *9.9%
*1. Steam consumption: **6Kg / h. (0.8MPa)
*2. Heat consumption: *****0Kcal/h
*3. Air consumption: ***3Kg/h
*4. Auxiliary electric heating: *0kw
*5. Power: ~*8 Kw (electricity heating power is not included)
THE MACHINE COULD BE DESIGNED AND MANUFACTURED ACCORDING TO THE
NATURE OF THE CLIENT MATERIALS. WELCOME TO SEND US THE RAW MATERIAL
FOR A TRIAL RUN.
Equipment Description
A. Atomizing mode: High efficient centrifugal spraying atomizer
with rotating speed **********0r/m. Atomizing disc diameter **0mm
and motor power 5.5KW.
B. Hot Air System: Connect the heating system to the drying tower
by hot air pipe made of SUS**4.
C. Dryer: DAR hot air spiral case, there are logarithm spiral
separating chamber on the top of the tower. The contact parts with
drying air are made of SUS**4. A set of drying tower with cone
*5degree, a cleaning door with observation window, a set of inner
lighting system inside of tower.
D. Exhaust system: A set connected with drying chamber, a set of
two class Cyclone dust collector, a set of spray dust collector and
exhaust fan pipe made of SUS**4. A set of exhaust fan made of SUS
**4 including air volume adjust butterfly valve.
E. Electrical control meter system: Meter control cabinet with
manual/automatic modes could be switched freely, convenient
operation and stable running. All material contact parts are made
of SUS**4, inner surface with mirror polished.
F. Features of the control system of lubricant pump and
atomizer:
A) If the lubricant is not start, the centrifugal atomizer will not
be start, which will avoid the running of atomizer without
lubrication and lead to the broken of atomizer.
B) The automatic control system of material supplying pump and
atomizer: If the atomizer doesn't work normally, the supplying pump
will not start, which is a interlock function to avoid the wrong
operation to lead to influence producing.
C) Hot air temperature is controlled by frequency conversion
through the intelligent temperature control unit. Which makes sure
the final moisture and stability of final produc
| Pays: |
China |
| N ° de modèle: |
LPG-150, LPG-100, LPG-50, LPG-5
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
Shanghai, China |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Unit |
| Packaging Detail: |
STANDARD EXPOPT PACKAGING |
| Heure de livraison: |
30days |
| Capacité de Fournir: |
1 Unit per Day |
| Payment Type: |
Other, PayPal, Money Gram, Western Union, T/T |
| Groupe de produits : |
Drying Equipment
|
